Current ISO system
The current International Standard for measuring the speed of colour negative film is called ISO 5800:1987 from the International Organization for Standardization (ISO). Related standards ISO 6:1993 and ISO 2240:2003 define scales for speeds of black-and-white negative film and color reversal film. This system defines both an arithmetic and a logarithmic scale, combining the previously separate ASA and DIN systems. In the ISO arithmetic scale, corresponding to the ASA system, a doubling of the sensitivity of a film requires a doubling of the numerical film speed value. In the ISO logarithmic scale, which corresponds to the DIN scale, adding 3° to the numerical value that designates the film speed constitutes a doubling of that value. For example, a film rated ISO 200/24° is twice as sensitive as a film rated ISO 100/21°.
Commonly, the logarithmic speed is omitted, and only the arithmetic speed is given; for example, “ISO 100”. Older systems GOST (Russian: ГОСТ) is an arithmetic scale which was used in the former Soviet Union before 1997. It is almost identical to the ASA standard, having been based on a speed point at a density 0.2 above base plus fog, as opposed to the ASA's 0.1. After 1987, the GOST scale was aligned to the ISO scale. GOST markings are only found on pre-1987 photographic equipment (film, cameras, lightmeters, etc.) of Soviet Union manufacture. Conversion from the logarithmic DIN speed S° to the arithmetic ASA speed S, as given by requires the following calculation: and rounding to the nearest standard arithmetic speed in the table below. By simple rearrangement, conversion from arithmetic speed to logarithmic speed is given by
and rounding to the nearest integer. Here the log function is base 10.
Determining film speed
ISO 6:1993 method of determining speed for black-and-white film.
Film speed is found from a plot of optical density vs. log of exposure for the film, known as the D–log H curve or Hurter–Driffield curve. There typically are five regions in the curve: the base + fog, the toe, the linear region, the shoulder, and the overexposed region. For black and white negative film, the “speed point” m is the point on the curve where density exceeds the base + fog density by 0.1 when the negative is developed so that a point n where the log of exposure is 1.3 units greater than the exposure at point m has a density 0.8 greater than the density at point m. The exposure Hm, in lux-s, is that for point m when the specified contrast condition is satisfied. The ISO arithmetic speed then is Determining speed for color negative film is similar in concept but more complex because it involves separate curves for blue, green, and red. The film is processed according to the film manufacturer’s recommendations rather than to a specified contrast. ISO speed for color reversal film is determined from the middle rather than the threshold of the curve; it again involves separate curves for blue, green, and red, and the film is processed according to the film manufacturer’s recommendations.
Applying film speed
Film speed is used in the exposure equations to find the appropriate exposure parameters. Four variables are available to the photographer to obtain the desired effect: lighting, film speed, f-number (aperture size), and shutter speed (exposure time). The equation may be expressed as ratios, or, by taking the logarithm (base 2) of both sides, by addition, using the APEX system, in which every increment of 1 is a doubling of exposure, known as a "stop". The effective f-number is proportional to the ratio between the lens focal length and aperture diameter, which is proportional to the square root of the aperture area. Thus, a lens set to f/1.4 allows twice as much light to strike the focal plane as a lens set to f/2. Therefore, each f-number factor of the square root of two (approximately 1.4) is also a stop, so lenses are typically marked in that progression: f/1.4, 2, 2.8, 4, 5.6, 8, 11, 16, 22, 32, etc.
Exposure index
Exposure index, or EI, refers to speed rating assigned to a particular film and shooting situation in variance to the film's actual speed. It is used to compensate for equipment calibration inaccuracies or process variables, or to achieve certain effects. The exposure index may simply be called the speed setting, as compared to the speed rating.
For example, a photographer may rate an ISO 400 film at EI 800 and then use push processing to obtain printable negatives in low-light conditions. The film has been exposed at EI 800.
Another example occurs where a camera's shutter is miscalibrated and consistently overexposes or underexposes the film; similarly, a light meter may be inaccurate. One may adjust the EI rating accordingly in order to compensate for these defects and consistently produce correctly exposed negatives.[citation needed]
Reciprocity
Upon exposure, the amount of light energy that reaches the film determines the effect upon the emulsion. If the brightness of the light is multiplied by a factor and the exposure of the film decreased by the same factor by varying the camera's shutter speed and aperture, so that the energy received is the same, the film will be developed to the same density. This rule is called reciprocity. The systems for determining the sensitivity for an emulsion are possible because reciprocity holds. In practice, reciprocity works reasonably well for normal photographic films for the range of exposures between 1/1000 second to 1/2 second. However, this relationship breaks down outside these limits, a phenomenon known as reciprocity failure
Film sensitivity and grain
Main article: Film grain
Grainy high speed B/W film negative
Film speed is roughly related to granularity, the size of the grains of silver halide in the emulsion, since larger grains give film a greater sensitivity to light. Fine-grain stock, such as portrait film or those used for the intermediate stages of copying original camera negatives, is "slow", meaning that the amount of light used to expose it must be high or the shutter must be open longer. Fast films, used for shooting in poor light or for shooting fast motion, produce a grainier image. Each grain of silver halide develops in an all-or-nothing way into dark silver or nothing. Thus, each grain is a threshold detector; in aggregate, their effect can be thought of as a noisy nonlinear analog light detector.
Kodak has defined a "Print Grain Index" (PGI) to characterize film grain (color negative films only), based on perceptual just noticeable difference of graininess in prints. They also define "granularity", a measurement of grain using an RMS measurement of density fluctuations in uniformly-exposed film, measured with a microdensitometer with 48 micrometre aperture. Granularity varies with exposure — underexposed film looks grainier than overexposed film.
Use of grain
In advertising, music videos, and some drama, mismatches of grain, color cast, and so forth between shots are often deliberate and added in post-production.
Marketing anomalies
Some high-speed black-and-white films, such as Ilford Delta 3200 and Kodak T-MAX P3200, are marketed with film speeds in excess of their true ISO speed as determined using the ISO testing method. For example, the Ilford product is actually an ISO 1000 film, according to its data sheet.The manufacturers do not indicate that the 3200 number is an ISO rating on their packaging. These films can be successfully exposed at EI 3200 (or any of several other speeds) through the use of push processing.
The current International Standard for measuring the speed of colour negative film is called ISO 5800:1987 from the International Organization for Standardization (ISO). Related standards ISO 6:1993 and ISO 2240:2003 define scales for speeds of black-and-white negative film and color reversal film. This system defines both an arithmetic and a logarithmic scale, combining the previously separate ASA and DIN systems. In the ISO arithmetic scale, corresponding to the ASA system, a doubling of the sensitivity of a film requires a doubling of the numerical film speed value. In the ISO logarithmic scale, which corresponds to the DIN scale, adding 3° to the numerical value that designates the film speed constitutes a doubling of that value. For example, a film rated ISO 200/24° is twice as sensitive as a film rated ISO 100/21°.
Commonly, the logarithmic speed is omitted, and only the arithmetic speed is given; for example, “ISO 100”. Older systems GOST (Russian: ГОСТ) is an arithmetic scale which was used in the former Soviet Union before 1997. It is almost identical to the ASA standard, having been based on a speed point at a density 0.2 above base plus fog, as opposed to the ASA's 0.1. After 1987, the GOST scale was aligned to the ISO scale. GOST markings are only found on pre-1987 photographic equipment (film, cameras, lightmeters, etc.) of Soviet Union manufacture. Conversion from the logarithmic DIN speed S° to the arithmetic ASA speed S, as given by requires the following calculation: and rounding to the nearest standard arithmetic speed in the table below. By simple rearrangement, conversion from arithmetic speed to logarithmic speed is given by
and rounding to the nearest integer. Here the log function is base 10.
Determining film speed
ISO 6:1993 method of determining speed for black-and-white film.
Film speed is found from a plot of optical density vs. log of exposure for the film, known as the D–log H curve or Hurter–Driffield curve. There typically are five regions in the curve: the base + fog, the toe, the linear region, the shoulder, and the overexposed region. For black and white negative film, the “speed point” m is the point on the curve where density exceeds the base + fog density by 0.1 when the negative is developed so that a point n where the log of exposure is 1.3 units greater than the exposure at point m has a density 0.8 greater than the density at point m. The exposure Hm, in lux-s, is that for point m when the specified contrast condition is satisfied. The ISO arithmetic speed then is Determining speed for color negative film is similar in concept but more complex because it involves separate curves for blue, green, and red. The film is processed according to the film manufacturer’s recommendations rather than to a specified contrast. ISO speed for color reversal film is determined from the middle rather than the threshold of the curve; it again involves separate curves for blue, green, and red, and the film is processed according to the film manufacturer’s recommendations.
Applying film speed
Film speed is used in the exposure equations to find the appropriate exposure parameters. Four variables are available to the photographer to obtain the desired effect: lighting, film speed, f-number (aperture size), and shutter speed (exposure time). The equation may be expressed as ratios, or, by taking the logarithm (base 2) of both sides, by addition, using the APEX system, in which every increment of 1 is a doubling of exposure, known as a "stop". The effective f-number is proportional to the ratio between the lens focal length and aperture diameter, which is proportional to the square root of the aperture area. Thus, a lens set to f/1.4 allows twice as much light to strike the focal plane as a lens set to f/2. Therefore, each f-number factor of the square root of two (approximately 1.4) is also a stop, so lenses are typically marked in that progression: f/1.4, 2, 2.8, 4, 5.6, 8, 11, 16, 22, 32, etc.
Exposure index
Exposure index, or EI, refers to speed rating assigned to a particular film and shooting situation in variance to the film's actual speed. It is used to compensate for equipment calibration inaccuracies or process variables, or to achieve certain effects. The exposure index may simply be called the speed setting, as compared to the speed rating.
For example, a photographer may rate an ISO 400 film at EI 800 and then use push processing to obtain printable negatives in low-light conditions. The film has been exposed at EI 800.
Another example occurs where a camera's shutter is miscalibrated and consistently overexposes or underexposes the film; similarly, a light meter may be inaccurate. One may adjust the EI rating accordingly in order to compensate for these defects and consistently produce correctly exposed negatives.[citation needed]
Reciprocity
Upon exposure, the amount of light energy that reaches the film determines the effect upon the emulsion. If the brightness of the light is multiplied by a factor and the exposure of the film decreased by the same factor by varying the camera's shutter speed and aperture, so that the energy received is the same, the film will be developed to the same density. This rule is called reciprocity. The systems for determining the sensitivity for an emulsion are possible because reciprocity holds. In practice, reciprocity works reasonably well for normal photographic films for the range of exposures between 1/1000 second to 1/2 second. However, this relationship breaks down outside these limits, a phenomenon known as reciprocity failure
Film sensitivity and grain
Main article: Film grain
Grainy high speed B/W film negative
Film speed is roughly related to granularity, the size of the grains of silver halide in the emulsion, since larger grains give film a greater sensitivity to light. Fine-grain stock, such as portrait film or those used for the intermediate stages of copying original camera negatives, is "slow", meaning that the amount of light used to expose it must be high or the shutter must be open longer. Fast films, used for shooting in poor light or for shooting fast motion, produce a grainier image. Each grain of silver halide develops in an all-or-nothing way into dark silver or nothing. Thus, each grain is a threshold detector; in aggregate, their effect can be thought of as a noisy nonlinear analog light detector.
Kodak has defined a "Print Grain Index" (PGI) to characterize film grain (color negative films only), based on perceptual just noticeable difference of graininess in prints. They also define "granularity", a measurement of grain using an RMS measurement of density fluctuations in uniformly-exposed film, measured with a microdensitometer with 48 micrometre aperture. Granularity varies with exposure — underexposed film looks grainier than overexposed film.
Use of grain
In advertising, music videos, and some drama, mismatches of grain, color cast, and so forth between shots are often deliberate and added in post-production.
Marketing anomalies
Some high-speed black-and-white films, such as Ilford Delta 3200 and Kodak T-MAX P3200, are marketed with film speeds in excess of their true ISO speed as determined using the ISO testing method. For example, the Ilford product is actually an ISO 1000 film, according to its data sheet.The manufacturers do not indicate that the 3200 number is an ISO rating on their packaging. These films can be successfully exposed at EI 3200 (or any of several other speeds) through the use of push processing.
